NEC Univerge SV8100 Features And Specifications Manual page 274

Issue 8.01
then,
Turn on the Private Call Refuse mode using the service code (Program 11-10-32) or Programmable
Function Key (code 86).
To transfer the "Private" Caller ID incoming call to incoming ring group 2 as ring pattern 3:

Program 14-01-27: 1 (reject)
Program 22-18-01: 2 (incoming ring group)
Program 22-18-02: 2 (group 2)
Program 22-18-03: 3 (ring pattern 3)
then,
Turn on the Private Call Refuse mode using the service code (Program 11-10-32) or Programmable
Function Key (code 86).
To reject the call with "2142622000" Caller ID incoming call:

Program 14-01-27: 1 (reject)
Program 20-07-25: 1 (Enable for COS)
Program 22-16: 64 (Speed Dial group 64)
Program 13-02; Group 64: 1000 - 1099
Program 13-04-01; Table 1000: 2142622000
then,
Turn on the Caller ID Refuse mode using the service code (Program 11-10-34) or Programmable
Function Key (code 87).
To transfer the call with "2142622000" Caller ID incoming call to extension 301 as ring pattern 1:

Program 13-04-01: 2142622000
Program 13-04-03: 1 (extension number)
Program 13-04-04: 301 (extension 301)
Program 13-04-05: 1 (tone pattern 1)
To transfer the call with "2142622000" Caller ID incoming call to incoming ring group 2 as ring

pattern 2:
Program 13-04-01: 2142622000
Program 13-04-03: 2 (incoming ring group)
Program 13-04-04: 2 (group 2)
Program 13-04-05: 2 (tone pattern 2)
Conditions
Caller ID Matching.

The UNIVERGE SV8100 compares the Caller ID and programmed Speed Dial and allows/
denies as indicated below.
The Speed Dial table is searched from the starting number and the first match result is

used.
The maximum number of VRS message channels that can be used simultaneously is 16.

These channels are also shared with the voice mail.
2 - 246
UNIVERGE SV8100
Caller ID – Flexible Ringing