Term Cordless Ii Terminal - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
term
The NEC D Cordless II Terminal may be used with the UNIVERGE SV8100 KTS. The DTR-4R-1
TEL uses 900 MHz Digital Spread Spectrum (DSS) Technology and must be connected in tandem to a
multiline terminal.
 The Dterm Cordless II cannot be used as standalone.
Press the applicable key on the Base Unit to Switch between cordless operation and multiline terminal
operation.
Digital Technology
LCD
Silent Alarm
Dedicated Keys
Programmable Line Keys
Operational Range
Message Waiting Indication
Headset Connection
Channels
 Determined by environmental conditions
Conditions
When a message is received the icon is displayed.

When the RING OFF/ON switch on the right side is down the

When the battery is low, the

When there is no transmission between the Base Unit and the handset for about five

minutes, there are no LCD or LED indications on the cordless terminal handset. Ringing
off-hook or pressing keys resumes LCD and LED indications.
The ring pattern for the cordless terminal can be selected by system programming and

multiline terminals.
term
D Cordless II Terminal
Feature

LOW
term
D Cordless II Terminal
term
D Cordless II (DTR-4R-1)
900 MHz Spread Spectrum
2-line, 16-digit LCD Display
Yes
TALK, TRANSFER, HOLD, CONF, CHAN,
REDIAL, MUTE, R/VOL
4
50~350 feet
 Icon
Yes
10
icon is displayed.
Issue 8.01
icon is displayed
OFF

.
2 - 507