NEC Univerge SV8100 Features And Specifications Manual page 719

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Room name can only be displayed on terminals set to 0 (Normal) in Program 42-02-01.
Both COM ports are fixed at 9600 bauds, eight data bits, one stop bit, and no parity.
The NEAX-90 with and without NAK protocol is compatible with property management systems
that support NEAX-90 protocol. Note that not all messages or functionality supported by NEAX
Model 90 protocol is implied or provided by the NEC PMS. The NEC PMS in conjunction with the
UNIVERGE SV8100 provides a subset of features supported by NEAX Model 90 protocol.
The PMS-U10 Configurator software Version 1.0.1.0 or higher is required for Microsoft Vista
32-bit support. To check the version number (while the application is running) press ALT + V.
Refer to the UNIVERGE SV8100 Hotel/Motel Services Guide for complete programming information.
PMS-U10 Configurator Software
The PMS Configurator is used to setup the PMS-U10 for LAN access and communication between it, the
chassis and voice mail. The PMS Configurator software is supported on the following Operating
Systems:
Microsoft Windows 2000
Microsoft Windows XP (32-bit)
Microsoft Vista 32-bit (Version 1.0.1.0 or higher)
Room to Room Calling Restriction
Prevent guests in one room from calling guests in another – a handy feature for guests that want to
maintain their privacy. If you need to, you can always allow inter-room calling (e.g., for families or groups
that have separate rooms).
Toll Restriction (When Checked In)
Control a guest's long distance dialing automatically when they check in. Use this feature to set up two
different Toll Restriction modes. The first mode is for you and your staff when the room is checked out.
The second mode is for your guests when they check in. You may want to restrict the outside numbers
guests can dial, but allow your staff to call vendors and suppliers.
Room Status
Your phone and DSS Console can set and monitor the status of all your guest rooms: Checked In,
Checked Out, Maid Required and Maid in Room. Maximize room usage by coordinating your cleaning
staff and reservation desk. For example, you can dial simple codes to set a room status.
Hotel/Motel
Issue 8.01
2 - 691

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents