NEC Univerge SV8100 Features And Specifications Manual page 118

Issue 8.01
Program
Program Name
Number
41-11-07 VRS Delay Announcement –
ACD Forced Disconnect Time
after the 2nd Delay Message
41-11-08 VRS Delay Announcement –
Queue Depth Announcement
(Requires VRS)
41-12-01 Night Announcement Setup –
Night Announcement Source
Type
41-12-02 Night Announcement Setup –
Night Announcement ACI Port
Number
41-12-03 Night Announcement Setup –
ACD Night Announce Sending
Time
41-13-01 VRS Message Number for Night
Announcement – VRS Message
Number
41-13-02 VRS Message Number for Night
Announcement – Tone Kind at
Message Interval
41-14-01 ACD Options Setup –
Emergency Call Operation Mode
2 - 90
Description/Comments
Set the time, after the last 2nd
Delay Message is played, before
the call is disconnected.
Input when the Queue Depth
Announcement will be played.
Define the source for each ACD
groups night announcement.
Night announcement availability
depends on the setting in Program
41-03-02.
Define the ACI port to be used for
the ACD Night Announcement
function.
Define the time the ACD night
Announcement plays. Only used
when Program 41-12-01 is set to 0
(ACI). Night announcement
availability depends on the setting
in Program 41-03-02.
Define the VRS message number
to be used as the night
announcement. This program is
activated when the night
announcement source is assigned
as VRS in Program 41-12-01.
Define what is heard between the
Night Announcements.
Define if Emergency Calls ring the
system supervisory extension or
not when the group supervisory
extension is busy. This option
allows the supervisor to press an
Emergency Key (programmed for
this feature) once to monitor the
call or twice to barge in on the call.
The supervisor must be logged in
for this feature to work.
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
0 = No Disconnect
(default = 60)
0 = Disable
1 = After 1st (1st)
2 = After 2nd (2nd)
3 = After 1st and 2nd
(1st and 2nd)
(default = 0)
0 = ACI
1 = VRS
(default = 0)
0~96
0 = No Setting
(default = 0)
0~64800 (seconds)
(default = 30)
0~100
0 = No Message
(default = 0)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
(default = 0)
0 = Call to system
supervisory extension
when group
supervisory extension
is busy.
1 = No calls to system
supervisory extension
when group
supervisory extension
is busy.
(default = 0)
Automatic Call Distribution (ACD)
Level
1 2 3







