NEC Univerge SV8100 Features And Specifications Manual page 793

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-12-03 CD-CP00-US Network Setup –
Default Gateway
10-12-05 CD-CP00-US Network Setup –
NIC Interface
10-12-06 CD-CP00-US Network Setup –
Network Address Port
Translation (NAPT) Router
10-12-07 CD-CP00-US Network Setup –
NAPT Router IP Address
(Default Gateway [WAN])
10-12-08 CD-CP00-US Network Setup –
ICMP Redirect
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
Assign the default gateway IP
address for the CD-CP00-US.
Set up the NIC Interface.
Define whether or not using an
external NAT router.
Define the IP Address of the WAN
side of the router.
When receiving ICMP redirect
messages, this determines if the
IP Routing Table updates
automatically or not.
Assigned Data
1
0.0.0.0~
126.255.255.254
128.0.0.1~

191.254.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0 = Auto Detect
1 = 100Mbps, Full
Duplex
2 = 100Mbps, Half
Duplex

3 = 10Mbps, Full
Duplex
4 = 10Mbps, Half
Duplex
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0= (Enable)
1= (Disable)

(default = 0)
Issue 8.01
Level
2 3


2 - 765