Dial Tone Detection - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the Telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key or
dialing 9 and the trunk number), the system drops the trunk if dial tone does not occur. If the user
#
accesses the trunk via a Trunk Group (by dialing a trunk group code or automatically using a feature like
Last Number Redial), the system can drop the trunk or optionally skip to the next trunk in the group.
Refer to the chart under Programming for more information.
Conditions
None
Default Setting
Disabled for manually dialed calls; enabled for automatically dialed calls.
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Automatic Route Selection
Call Appearance (CAP) Keys
Central Office Calls, Placing

Dial Tone Detection

Dial Tone Detection
Issue 8.01
2 - 407