Microphone Cutoff - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Description
Microphone Cutoff lets a multiline terminal user turn off their telephone handsfree or handset
microphone anytime. When activated, Microphone Mute prevents the caller from hearing conversations
in the user's work area. The user may turn off the microphone while their telephone is idle, busy on a
call or ringing. The microphone stays off until the user turns it back on.
Conditions
Microphone Cutoff does not operate if the user calls another extension and the called

extension user responds without lifting the handset or pressing Speaker.
When using the Handset Transmission Cutoff key during an intercom call with the handset

on-hook, you hear three beep tones and the LED is on solid. This also occurs on an
outside call.
When using the Handset Transmission Cutoff key during an intercom call with the handset

off-hook, you hear three beep tones through the handset and the Handset Transmission
Cutoff and MIC keys flash. This also occurs on an outside call.
When Handset Transmission Cutoff is activated and the handset is off-hook, pressing

Speaker and returning the handset to the cradle turns off the Handset Transmission Cutoff
key. Three beep tones are heard over the telephone speaker.
Default Setting
Enabled (using MIC key)
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None

Microphone Cutoff

Microphone Cutoff
Issue 8.01
2 - 955