NEC Univerge SV8100 Features And Specifications Manual page 265

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
20-09-04
Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-13-06
Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-19-01
System Options for Caller ID –
Caller ID Displaying Format (If
displaying digits are more than
12 digits)
20-19-05
System ID Options for Caller ID –
Caller ID Sender Queuing Time
(Sender Wait)
20-20-01
Message Setup for Non-Caller ID
Data – Private Call
20-20-02
Message Setup for Non-Caller ID
Data – Call from Out of Service
Area
20-20-03
Message Setup for Non-Caller ID
Data – Call Information with
Error
Caller ID
Description/Comments
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
Determine whether the first 10
digits or last 10 digits should be
displayed when Caller ID exceeds
12 digits.
With the Caller ID Sender Queuing
option, determine the time an
incoming call waits in queue for a
DSP resource to become
available. If a resource becomes
available during this time, the call
immediately rings the single line
telephone with Caller ID. If the
time expires before a resource
becomes available, the system
rings the single line telephone
without Caller ID (until the queuing
time expires, the single line
telephone does not ring). If the
queuing timer is set to 0, the
system does not queue the
incoming call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a private
call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as an
out-of-service area call.
Enter the text to be displayed for
Caller ID when a user receives a
call which is classified as a call
with a CID error.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = First 10 digits
(Upper)
1 = Last 10 digits
(Lower)
(default = 0)
0~64800 (seconds)
(default = 0)
24 Alphanumeric
Characters
(default = PRIVATE)
24 Alphanumeric
Characters
(default = OUT OF
AREA)
24 Alphanumeric
Characters
(default = NO CALLER
INFO)
Issue 8.01
Level
2
3
2 - 237

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents