NEC Univerge SV8100 Features And Specifications Manual page 661

UNIVERGE SV8100
Program
Program Name
Number
11-16-02 Single Digit Service Code Setup
– Barge-In
11-16-03 Single Digit Service Code Setup
– Switching of Voice/Signal Call
11-16-04 Single Digit Service Code Setup
– Intercom Off-Hook Signaling
11-16-05 Single Digit Service Code Setup
– Camp-On
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
11-16-07 Single Digit Service Code Setup
– Message Waiting
11-16-08 Single Digit Service Code Setup
– Voice Over
11-16-09 Single Digit Service Code Setup
– Access to Voice Mail
11-16-10 Single Digit Service Code Setup
– (Department) STG All Ring
Mode
11-16-11 Single Digit Service Code Setup
– Station Park Hold
11-20-01 Dial Extension Analyze Table –
Dial Digits
Flexible System Numbering
Description/Comments
Set up Item 02 for single digit
Barge-In. For example, you can
assign Item 02 to use digit 5 for
Barge-In. This would allow you to
program a function key with an
extension number plus the
Barge-In code (i.e., 5). This allows
one-touch access to the Barge-In
feature for extension.
Customize the switching of Voice/
Signal call Service Codes used
when a busy or ring back signal is
heard.
Assign a one-digit service code to
be used for off-hook Signaling.
Customize the 1-digit Service
Code used for setting Camp-On.
Customize the 1-digit Service
Code used for DND/Call Forward
Override.
Customize the message waiting
Service Codes used when a busy
or ring back signal is heard.
Service code used for the Voice
Over feature.
Customize the access to voice
mail Service Codes used when a
busy or ring back signal is heard.
Assign the Single Digit
(post-dialing) Service Code for All
Member Ring.
Customize the one-digit service
code used when placing a call in
Personal Park.
Use tables 01~128 to assign the
digits to be dialed using the Dial
Extension Analyze Tables. These
tables are used when Program
11-01-01 is set to option 9 = Dial
Extension Analyze. Up to eight
digits can be assigned.
Assigned Data
1
(default not assigned)
(default = 1)
(default = )
#
(default = )
(default not assigned)
(default = 0)
(default = 6)
(default = 8)
(default not assigned)
(default not assigned)
Dial (Up to eight digits:
#
0, 1~9, , , @)

Issue 8.01
Level
2 3










2 - 633