NEC Univerge SV8100 Features And Specifications Manual page 282

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Sidetone Volume Setup

This option allows system programming for the multiline terminal side tone volume. There are two levels,

based on whether the connected trunk is a digital trunk or analog trunk.

The incoming ring group assignment programmed in Program 41-03-01 overrides the

setting in Program 22-05-01.

Ringing calls can be picked up regardless of access map programming.

An extension user can answer an outside call just by lifting the handset.

Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time

period. Using the Warning Tone for Long Conversation feature allows users on outgoing

calls to hear a warning tone prior to the call disconnecting.

Line keys and Call Appearance (CAP) Keys simplify answering outside calls.

If the Absent text message was set by the originating extension, the destination extension

displays the assigned text message instead of the Reason for Transfer message.

If an extension is assigned to a Trunk Access Map that has no access for a trunk, the

extension can still retrieve parked calls on that trunk. The extension can also Group Call

Pickup and Direct Call Pickup calls ringing another extension on that trunk.

In Version 3000 or higher software the system can be programmed to blink the page

number of a DT300/DT700 DESI-Less terminal when it receives an incoming call, or switch

to the page the incoming call is on. Furthermore, a default page can be defined for the

DESI-Less terminal to change to when it goes idle or when it has answered a call.

DT300/DT700 terminals installed in a SV8100 with the IPK/IPK II Migration system do not

support the DESI-Less page switching and blinking.

DESI-Less screen page switching only applies to idle terminals. If a terminal is not idle, the

screen will not switch if another call comes in until the phone goes idle.

To adjust for proper audio quality, refer to Programs 81-07 and 81-17.

Default Setting

UNIVERGE SV8100

Central Office Calls, Answering

Show Quick Links

Table of Contents