NEC Univerge SV8100 Features And Specifications Manual page 839

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
ISDN – BRI Installation
Program
Program Name
Number
10-03-01
ETU Setup (BRIA PKG) – ISDN
Line Mode
10-03-03
ETU Setup (BRIA PKG Setup) –
Connection Type
10-03-04
ETU Setup (BRIA PKG Setup) –
Layer 3 Timer Type
10-03-08
ETU Setup (BRIA PKG Setup) –
Dial Sending Mode
10-03-09
ETU Setup (BRIA PKG Setup) –
Dial Information Element
ISDN Compatibility
Description/Comments
Set up and confirm the Basic
Configuration data for each
CD-2BRIA. Use this program to
select the ISDN Line Mode.
Set up and confirm the Basic
Configuration data for each
CD-2BRIA. Confirm the
connection type for each
CD-2BRIA.
Set up and confirm the Basic
Configuration data for each
CD-PRTA. This program selects
the Layer 3 timer type (1~5). Each
timer value of Layer 3 is set up for
each type in Program 81-06
(T-Bus).
Select ISDN protocol.
Select ISDN Protocol if Overlap
Sending is selected in Program
10-03-08.
Assigned Data
1
0 = Not Used
1 = T-Point
(default = 1)
0 = Point-to-Multipoint
1 = Point-to-Point
(default = 0)
1~5
(default = 1)
0 = Enblock Sending
1 = Overlap Sending
(default = 1)
0 = Keypad Facility
1 = Called Party
Number
(default = 0)
Issue 8.01
Level
2
3
2 - 811

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents