Ccis Networking Via Ip (Peer-To-Peer Connections Basis); Table 2-38 K-Ccis Main And Remote System Voip Resources Used - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

When using Version 5000 or higher software, InMail is supported for centralized voice

mail in a KTS to KTS CCIS network.

In a CCIS network, the Memo Display Function only supports DID calls directed across

CCIS to a remote system.

Calls forwarded or transferred across CCIS do not support the Memo Display Function.

With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board

installed, half duplex connections are not supported. For troubleshooting purposes, a

managed switch capable of port mirroring is required to capture packet data from the

SV8100 IPLB Ethernet port.

CCIS Networking via IP (Peer-to-Peer Connections Basis)

IP-KCCIS has been improved to support Peer-to-Peer calls between IP Terminals residing in different

offices, without using DSP resources. With Version 4000 or lower software, two DSP resources in

each office/system were consumed for calls between an IP Terminal and an IP Terminal. Refer to the

SV8100 Networking manual for more information.

The number in

each box indicates

how many VoIP

resources are used

M = Main K-CCIS System

R = Remote K-CCIS System

Main software Version 4000 (4.01 or higher) and the Version 4000 Main Version license

is required for the SV8100 to support Peer-to-Peer in a CCISoIP network.

DT700 terminals are supported for Peer-to-Peer connections via a P2P CCIS call.

Remote System

Show Quick Links

Table of Contents