NEC Univerge SV8100 Features And Specifications Manual page 844

Issue 8.01
Program
Program Name
Number
15-01-04 Basic Extension Data Setup –
ISDN Caller ID
20-06-01 Class of Service for Extensions
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
21-12-01 ISDN Calling Party Number
Setup for Trunks
21-13-01 ISDN Calling Party Number
Setup for Extensions
2 - 816
Description/Comments
If Program 15-01-04 and Program
10-03-05 are enabled, the system
includes Caller ID in the Setup
message as Presentation Allowed.
If these options are disabled, it is
Presentation Restricted.
Assign a Class of Service (1~15)
to an extension.
Determine if the ISDN calling line
identity presentation and
screening indicators should be
allowed.
Assign Calling Party Numbers for
each trunk (maximum 16 digits per
entry). When a call is made by an
extension which does not have an
Extension Calling Number
assigned (Program 21-13), the
system sends the calling number
for the ISDN trunk defined in
21-12. If the Calling Party Number
is assigned in both Program 21-12
and Program 21-13, the system
sends the data in Program 21-13.
Assign a Calling Party Number
(maximum 16 digits per entry) to
each extension. The calling
number is the subscriber number
of the dial-in number. When a call
is made by an extension which
does not have an Extension
Calling Number assigned
(Program 21-12), the system
sends the calling number for the
ISDN trunk defined in Program
21-13. If a Calling Party Number is
assigned in both Program 21-12
and Program 21-13, the system
sends the data in Program 21-13.
UNIVERGE SV8100
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0)
(maximum 16 digits)
#
1-0, ,
Default:
(All trunks = No setting)
#
0~9, ,

(maximum 16 digits)
(default not assigned)
ISDN Compatibility
Level
2 3




