NEC Univerge SV8100 Features And Specifications Manual page 478

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
11-01-01 System Numbering
11-09-02 Trunk Access Code – 2nd Trunk
Route Access Code
14-01-02 Basic Trunk Data Setup –
Transmit Level
14-01-03 Basic Trunk Data Setup –
Receive Level
2 - 450
Description/Comments
Reserve at least one circuit for
DTMF reception (entry 0 or 2).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one

DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate

one DTMF receiver for every
five devices that use them.
Define the system numbering
plan.
Assign the Service Code set up in
Program 11-01 for 2nd (Alternate)
Trunk Route Access.
Customize the transmit and
receive levels of the CODEC Gain
Types for each trunk.
Customize the transmit and
receive levels of the CODEC Gain
Types for each trunk.
UNIVERGE SV8100
Assigned Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
Refer to UNIVERGE
SV8100 System
Programming Manual
Dial (up to four digits)
(default not assigned)
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
Direct Inward System Access (DISA)
Level
1 2 3




