NEC Univerge SV8100 Features And Specifications Manual page 344

Issue 8.01
Code Restriction
Station Message Detail Recording
Voice Response System (VRS)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-34 Service Code Setup (for Setup/
Entry Operation) – Temporary
Toll Restriction Override
11-11-36 Service Code Setup (for Setup/
Entry Operation) – Toll
Restriction Override
20-08-06 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Override
21-01-07 System Options for Outgoing
Calls – Toll Restriction Override
Time
21-07-01 Toll Restriction Override
Password Setup
21-14-01 Walking Toll Restriction
Password Setup – User ID
2 - 316
Description/Comments
If required, change the service
code (775) for Temporary Toll
Restriction Override.
If required, change the service
code (663) for Toll Restriction
Override.
Turn Off or On Toll Restricting
Override (Service Code 663).
Set the Toll Restriction Override
Time. After dialing the Toll
Restriction Override codes, the
system removes Toll Restriction
for this Time.
Assign Toll Restriction Override
codes to extensions. Each code
must have four digits, using any
#
combination of 0~9, and . Each
extension can have a separate
code, or many extensions can
share the same override code.
Enter the Walking Toll Restriction
Override User ID codes (six digits)
into tables. Up to 500 different
override codes can be entered.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 775)
MLT, SLT
(default = 663)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10)

Maximum four digits
#
(0~9, , )
(default not assigned)

Dial (Six digits)

(default not assigned)
Code Restriction Override
Level
2 3

