NEC Univerge SV8100 Features And Specifications Manual page 309

UNIVERGE SV8100
Program
Program Name
Number
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
Class of Service
Description/Comments
Determine if the ISDN calling line
identity presentation and
screening indicators are to be
allowed.
Enable/ Disable Call Address
Information for each Class of
Service.
Turn Off or On a user Class of
Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turn Off or On an extension ability
to display the name and number of
the extension that dialed 911.
Turn Off or On an extension user
ability to override the trunk access
map programming for outgoing
calls.
Turn Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turn Off or On an extension user
ability to make a call by just dialing
the number without first going
off-hook.
Enable/Disable the ability to
access trunks when going off-hook
by pressing the speaker key for
each Class of Service.
Enable/Disable the ability to make
voice over to a busy virtual
extension for each Class of
Service.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 8.01
Level
2 3









2 - 281