NEC Univerge SV8100 Features And Specifications Manual page 181

UNIVERGE SV8100
Program
Program Name
Number
11-04-01 Virtual Extension Numbering
15-01-01 Basic Extension Data Setup –
Extension Name
15-01-05 Basic Extension Data Setup –
Restriction for Outgoing Disable
on Incoming Line
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
Lines
15-02-21 Multiline Telephone Basic Data
Setup – Virtual Extension
Access Mode (when idle Virtual
Extension key pressed)
15-07-01 Programmable Function Keys
Call Arrival (CAR) Keys
Description/Comments
Assign virtual extension numbers.
Define the extension/virtual
extension name.
Enable (1)/Disable (0) supervised
dial detection for an extension.
Assign automatic hold (or
disconnect) for CO lines.
Determine whether a Virtual
Extension/Call Arrival Key (CAR)
should function as a DSS key, a
Virtual Extension, or a CAR key.
When DSS (0) is selected, the key
functions as a DSS key to the
extension and for incoming calls to
that extension. When Outgoing
(1) is selected, the key functions
as a virtual extension and can be
used for incoming and outgoing
calls. When Ignore (2) is selected,
the key functions as a CAR key
and can receive incoming calls
only.
Assign functions to multiline
terminal line keys.
Assigned Data
1
Up to eight digits
1 201
2 202
3 203
~ ~ 
99 299
100 3601
~ ~
256 3857
Up to 12 characters
Default:
STA 101 = Ext 101
STA 102 = Ext 102,
etc.
0 = No
1 = Yes
(default = 0)
0 = Hold
1 = Disconnect (Cut)
(default = 1)
Virtual Extension Key
Mode
0 = DSS
1 = Outgoing
2 = Ignore
(default = 2)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function

Code) (Service Code
752 by default)

( 03 + ICM = VE or
CAR where ICM is the
extension number of
the VE or CAR)
Issue 8.01
Level
2 3




2 - 153