NEC Univerge SV8100 Features And Specifications Manual page 486

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 8.01
Program
Program Name
Number
25-10-01
Trunk Group Routing for DISA
25-11-01
DISA Toll Restriction Class
25-12-01
Alternate Trunk Group Routing
for DISA
25-15-01
DISA Transfer Target Setup –
DISA Transfer Target Area at
Wrong Dial
25-15-02
DISA Transfer Target Setup –
DISA Transfer Target Area at No
Answer or Busy
2 - 458
Description/Comments
Assign the Trunk Group Route
chosen when a user places a
DISA call to the system and dials
9. Set Trunk Group Routing in
Program 14-06. Enable or disable
DISA caller ability to dial 9 in
Program 20-14-02. Assign a route
to each DISA Class of Service
(1~15). The system assigns a
DISA Class of Service to a call
based on the password the DISA
caller dials.
If the system uses Toll Restriction,
enter a Toll Restriction Class
(1~15) for each DISA user (1~15).
The system uses the Toll
Restriction Class you enter in
Program 21-05 and 21-06. The
Toll Restriction Class assigned to
a DISA call is based on the DISA
Class of Service and user, which is
determined by the password the
caller dials. Program 21-04 cannot
be used to assign Toll Restriction
to DISA trunks.
Assign the trunk route that DISA
Callers access if they dial the
Alternate Trunk Route Access
Code. Refer to
Central Office
Calls, Placing on page 2-265
more information on setting up
Alternate Trunk Route Access.
Used to assign a speed dial
number when the wrong number is
received.
Used to assign a speed dial
number when a dial tone times out
and the target extension does not
answer or is busy.
UNIVERGE SV8100
Assigned Data
Day/Night Mode = 1~8
Route Table Number =
0~100
(0 = No Setting)
(default = 1)
Day/Night Mode = 1~8
Toll Restriction Class =
1~15
(default = 2)
Day/Night Mode = 1~8
Route Table Number =
0~100
(0 = No Setting)
for
(default = 1)
Speed Dial bin number
0~1999
(default = 1999)
Version 3000 software
or higher is required
Speed Dial bin number
0~1999.
(default = 1999)
Version 3000 software
or higher is required.
Direct Inward System Access (DISA)
Level
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents