NEC Univerge SV8100 Features And Specifications Manual page 470

Issue 8.01
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
2 - 442
Description/Comments
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.
With this option set to 1, the

destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Select whether or not an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
A DIL that rings its programmed
destination longer than this time
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
Assign each DIL Service Type 4.
Make an entry for each Night
Service mode.
Assign the extensions that should
receive the overflow to the ring
group programmed in Program
22-08. Set the ringing in Program
22-06.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 0)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Direct Inward Line (DIL)
Level
2 3



