NEC Univerge SV8100 Features And Specifications Manual page 70

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
15-02-01 Multiline Telephone Basic Data
Setup – Display Language
Selection
(To select options 8~10, press
either 8 or Recall, then press line
keys 1~3. Key 1 is option 8, Key 2
is option 9, and Key 3 is option 10.)
20-06-01 Class of Service for Extensions
20-11-08 Class of Service Options (Hold/
Transfer Service) – Transfer
Information Display
2 - 42
Description/Comments
If needed, redefine the service
code used to select the language
for display multiline terminals.
Select the language to be
displayed on a multiline terminal
display.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an incoming
transfer preanswer display for an
extension.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 678)
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for COS
01~15)
Alphanumeric Display
Level
2 3



