NEC Univerge SV8100 Features And Specifications Manual page 45

UNIVERGE SV8100
If your system has Verified Account Codes enabled, be sure to choose a code programmed in your
Verified Account Code list.
1. Access trunk for outside call.
Press a line key or dial a code.to access a trunk. Refer to

information.
2. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
3. Dial your Account Code [1~16 digits, using 0~9 and
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,

each digit you dial shows
4. Dial .

- OR -
Press your Account Code key (Program 15-07-01 or SC 751: code 50).
5. Dial the number you want to call.
To dial an outside number and let your system tell you when a Forced Account Code is required:
1. Access a trunk and dial the number you want to call.
2. Wait for your call to go through.
- OR -
3. If you hear "Please enter an Account Code," (depending on system programming) and your
display shows ENTER ACCOUNT CODE.
Dial .


- OR -
Press your Account Code key (
Dial your Account Code (3~16 digits, using 0~9 and #).

If Account Codes are hidden, each digit you dial shows
Dial .


- OR -
Press your Account Code key (
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps dial digits out onto the connected trunk.

Account Code – Forced/Verified/Unverified
on the telephone display (depending on programming).

Program
15-07-01 or SC 751: code 50).
Program
15-07-01 or SC 751: code 50).
Central Office Calls, Placing on page 2-265
or (3~16 digits for Forced)].
#
on the telephone display.

Issue 8.01
for more
2 - 17