NEC Univerge SV8100 Features And Specifications Manual page 493

UNIVERGE SV8100
When a multiline terminal user is on a call, they can transfer to another station by pressing

a DSS key for that station. It is not necessary to press Transfer to transfer to another
station using a DSS key.
When a multiline terminal user is on a call, they must press Transfer to transfer a call off site with a DSS

key.
Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered

as P in the dial string and causes the system to wait three seconds before sending the rest
of the digits that follow the P (pause). Multiple pauses can be entered.
The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to

ISDN and Intercom calls. When using the @, the system waits for the destination to answer
(answer supervision), and then sends the rest of the digits.
Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom

calls, or after the @ for ISDN calls.
When the system has the Hotel Motel license (0007), the Message Waiting Indication

(MWI) on a DSS Console for an extension is a Green LED. Without the Hotel Motel license
the MWI on a DSS Console for an extension is a Red LED.
Default Setting
No DSS Consoles assigned (in Program 30-02-01).

All DSS Console key ranges are ports 1~200.

Once a DSS Console is enabled, the console keys are DSS keys (Program 30-03-01).

System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Direct Station Selection (DSS) Console
Issue 8.01
2 - 465