NEC Univerge SV8100 Features And Specifications Manual page 796

Issue 8.01
Program
Program Name
Number
10-28-04 SIP System Information Setup –
User ID
10-28-05 SIP System Information Setup –
Domain Assignment
10-28-06 SIP System Information Setup –
IP Trunk Port Binding
10-29-01 SIP Server Information Setup –
Default Proxy (Outbound)
10-29-02 SIP Server Information Setup –
Default Proxy (Inbound)
10-29-03 SIP Server Information Setup –
Default Proxy IP Address
2 - 768
Description/Comments
Define the User ID.
Define the Domain Assignment.
This entry is determined by what
information the SIP carrier
provides. If the SIP carrier
provides a server name:
SIPconnect-sca@L0.cbeyond.net,
then the domain is:
L0.cbeyond.net and the host name
is SIPconnect-sca.
Enable/Disable IP Trunk Port
binding.
Define the SIP Proxy setup,
Default Proxy (Outbound). When
SIP trunking is used, this must be
on.
 If entries are made in
Program 10-29-xx for an SIP
Server and the SIP Server is
removed or not used, the
entries in Program 10-29-xx
must be set back to their
default settings. Even if
Program 10-29-01 is set to 0
(off), the UNIVERGE SV8100
still checks the settings in the
remaining 10-29 programs.
Define the Default Proxy
(Inbound).
Enter the default Proxy IP Address
if the SIP carrier is using an IP
address for the proxy. In most
cases, this is left at the default
entry as the domain name is used.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
Up to 32 Characters
When assigning the
User ID, the ID may
contain only alpha
characters. (A space

and/or special
characters are not
allowed in the User ID
field).
(default not assigned)
0 = IP Address
1 = Domain Name
(default = 0)

0 = Disable

1 = Enable
(default = 0)
0 = Off
1 = On
(default = 0)

0 = Off

1 = On
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~

191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
Level
2 3