NEC Univerge SV8100 Features And Specifications Manual page 525

UNIVERGE SV8100
Single Line Telephones, Analog 500/2500 Sets
Wireless DECT (SIP)
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
(1) Terminal Type (B1)
10-03-06 ETU Setup (DLCA PKG Setup) –
Terminal Type (B2)
Door Box
Description/Comments
Set up and confirm the Basic
Configuration data for terminal
type (B1).
Set up and confirm the Basic
Configuration data for terminal
type.
For DLC package support, set the
terminal type to 8 [PGD (for Door
Box)]. First set 10-03-01 to 0 with
no device plugged into that port,
then plug the device in and the
system should recognize it as a
door box and then set Program
10-03-06.
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Not set
6 = PGD(2)-U10 ADP
(Paging)
7 = PGD(2)-U10 ADP
(Tone Ringer)

8 = PGD(2)-U10 ADP
(Door Box)
9 = PGD(2)-U10 ADP
(ACI)
12 = APR (B2 Mode)
(default = 0)
Issue 8.01
Level
2 3

2 - 497