NEC Univerge SV8100 Features And Specifications Manual page 310

Issue 8.01
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-09-05 Class of Service Options
(Incoming Call Service) – Signal/
Voice Call
20-09-06 Class of Service Options
(Incoming Call Service) –
Incoming Time Display
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-09-08 Class of Service Options
(Incoming Call Service) – Calling
Party Information
2 - 282
Description/Comments
Turn Off or On the extension
ability to receive a second call
from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the

destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a line or Call
Appearance (CAP) Keys
available for the second call
and a previous call is ringing
the extension but has not
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On the Caller ID
display at an extension.
Define whether or not an
extension displays the Caller
Sub-Address.
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Turn Off or On an extension user
ability to enable Handsfree
Answerback or Forced Intercom
Ringing for their incoming
Intercom calls.
If this option is set to 1, the
Incoming Call Time is displayed on
the multiline terminals LCD while
the telephone is ringing.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is busy.
Turn Off or On and extension user
ability to display calling party
information on CCIS calls.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
01~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Class of Service
Level
2 3







