NEC Univerge SV8100 Features And Specifications Manual page 492

Issue 8.01
Conditions
Changing flash patterns for DSS Consoles also changes them for Hotline keys.

When installing a DSS, the system must auto-detect the console for the LEDs to function

correctly. When connecting the DSS to an extension previously defined with another circuit
type, undefine the circuit type (enter 00 in Program 10-03-01 for the extension number),
then connect the DSS Console.
Programmable Function Keys for ACD codes (

cannot be programmed on a DSS Console.
Programmable Function keys for Trunk Group (

Appearance (CAP) Key (
does not allow entry of the additional data required for these keys.
A user can use the One-Touch Programmable Function Key (code 01) to have DSS

Console keys for Personal Speed Dial and common and group Speed Dial.
Lighting status for ACD agents and non-ACD agents does not appear on the same console

type. For ACD agent's lighting status, a DSS Console must be programmed as an ACD
console in Program 30-01-01. For non-ACD agents, the console must be programmed as a
business console.
A DSS key indicates only a Call Forwarding indication for extensions forwarded with

Immediate Call Forwarding.
A DSS Console can have line keys for placing and answering calls.

The DSS Console provides one-touch calling and a Busy Lamp Field for Door Boxes. Refer

to Door Box on page 2-495
The DSS Console provides one-touch Night Service switching. Refer to

page 2-1017
Like a One-Touch Key, a user can have DSS Console keys for Direct Station Selection,

Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access.
The DSS Console provides one-touch External and Internal Page zone access. Refer to

Paging, External on page 2-1053
You can program the DSS Console keys with service codes to provide the functions of

many of the Programmable Function keys. The stored service code can have up to three
digits, but it can have additional option codes added (e.g. to set Immediate Call Forward for
all calls. Trunk Group (
codes can not be programmed on a DSS Console as the system does not allow entry of the
additional data required.
The capacity of a console can be expanded by assigning a Page key (shift key). The Page

key (shift key) must be assigned on keys 55~60.
The expanded capacity for DSS Consoles (two pages), is not supported for DSS Consoles

in the ACD Monitor Mode.
2 - 464
08) cannot be programmed on a DSS Console as the system

when programming Door Boxes.
when programming Night Service options.
and
02), Virtual Extension (

10, 12, 13,
  
02), Virtual Extension (

Paging, Internal on page
03), and Call Appearance (CAP) Key (

Direct Station Selection (DSS) Console
UNIVERGE SV8100
14, 15, 16, 17, 18,
    
03), and Call

Night Service on
2-1065.
19)

08)
