NEC Univerge SV8100 Features And Specifications Manual page 358

Issue 8.01
Program
Program Name
Number
15-02-24 Multiline Telephone Basic Data
Setup – Conference Key Mode
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-13-08 Class of Service Options
(Supplementary Service) –
Conference
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
20-13-15 Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
2 - 330
Description/Comments
Allow an extension Conf key to be
programmed for Conference or for
Transfer. When set for Transfer,
the user places a call on hold,
dials the extension to which it
should be transferred, then
presses the Conf key. The call is
then transferred. When set for
Conference, with an active call,
the user presses the Conf key,
places a second call, then presses
the Conf key twice. All the calls
are then connected.
Assign functions to multiline
terminal line keys.
Assign a Class of Service (1~15)
to extensions.
Allow/Deny an extension users's
ability to set up a tandem/
conference call automatically
when they hang up.
Turn Off or On an extension user
ability to initiate a conference or
Meet Me Conference.
Enable the Barge-In Speech Mode
or Monitor Mode at the initiating
extension (i.e., Barge-In initiator).
Turn Off or On an extension user
ability to barge-in on other's calls.
UNIVERGE SV8100
Assigned Data
1
0 = Conference
1 = Transfer
(default = 0)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Allow
1 = Deny

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Speech
1 = Monitor
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Conference
Level
2 3

