NEC Univerge SV8100 Features And Specifications Manual page 297

UNIVERGE SV8100
Program
Program Name
Number
14-01-10 Basic Trunk Data Setup – DTMF
Tones for Outgoing Calls
14-02-05 Analog Trunk Data Setup – Dial
Tone Detection for Manually
Accessed Trunks
14-02-11 Analog Trunk Data Setup – Next
Trunk in Rotary if No Dial Tone
14-02-14 Analog Trunk Data Setup – Loop
Start/Ground Start
14-05-01 Trunk Group – Trunk Group
Number
14-06-01 Trunk Group Routing – Priority
Order Number
Central Office Calls, Placing
Description/Comments
For each trunk, Enable/Disable the
ability to hear the DTMF of the
digits dialed when placing the
outgoing call.
Enable/Disable dial tone detection
for directly accessed trunks. If
disabled, the system outdials on
the trunks without monitoring for
dial tone.
Enable/Disable the system ability
to skip over a trunk if dial tone is
not detected. This option pertains
to calls placed using Call
Appearance (CAP) Keys, Speed
Dial, Automatic Route Selection
(ARS), Last Number Redial or
Save Number dialed. It does not
pertain to line key or Direct Trunk
Access calls.
Select Loop start or Ground start
for the trunk.
Assign trunks to Trunk Groups.
You can also assign the outbound
priority for trunks within the group.
When users dial up the trunk
group, they seize the trunks in the
order you specify in the outbound
priority entry.
At default, all group are

assigned to Trunk Group 1.
Set the priority order number 1~4.
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)
0 = Dial Tone
Detection Not Used
1 = Dial Tone
Detection Used
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = Loop Start (Loop)
1 = Ground Start
(Ground)
(default = 0)
Trunk Group Number:
0~100
Priority Number:

1~200
(default = Trunk Group
1, with priority in
ascending order)
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified)
Issue 8.01
Level
2 3




2 - 269