NEC Univerge SV8100 Features And Specifications Manual page 455

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

When ordering DID service, provide the Telco with the following information:

UNIVERGE SV8100

DID Facility Interface Code

DID Service Order Code

DID Answer Supervision Code

DID USOC Jack Type

Analog DID requires the installation of a CD-4DIOPA Blade (provides four DID ports).

Depending on programming, the system may assign both trunk and extension ports (if OPX

is selected in Program 10-03-01) when this blade is installed.

DID service must be purchased from your local telephone company.

DID Intercept for each DID number works for DID trunks with a trunk service type 3 in

Program 22-02. Other types of trunks may use the DID table, but the DID intercept feature

for each DID number is not yet supported.

When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or

DND, the reason for Transfer option can display to the transferred extension when the call

is ringing to their telephone.

Direct Inward Lines (DILs) also provide a way for outside callers to dial a system extension,

virtual extension, or Department Group directly.

DISA also allows outside callers to dial system extensions directly.

The Off-Hook Signaling provide DID calls with signaling options. Refer to Off-Hook

Signaling for specific details.

DID trunks do not ring external page speakers. Only trunks defined as normal in Program

22-02-01 ring external page speakers.

To simplify answering DID calls, assign function keys as line keys for the DID trunks.

SMDR can print trunk port names or received dialed number for ANI/DNIS or DID trunks. If

enabled, DNIS digits can be printed on the SMDR reports instead of the trunk name.

Transferred calls on DISA, DID, DIL, ISDN trunks, or from the VRS can display the reason

a call is being transferred (Call Forward, Busy, No Answer, or DND).

When defining trunks as DID or DID Mode in Program 22-02-01, DID translation (Program

22-11 or Program 22-17) must be used, even if the incoming digits match the extension

Direct Inward Dialing (DID)

KF = US:NIFKF07B

MF = US:NIFMF07B

PF = US:NIFPF07B

Show Quick Links

Table of Contents