NEC Univerge SV8100 Features And Specifications Manual page 495

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
15-02-08 Multiline Telephone Basic Data
Setup – Automatic Handsfree
20-06-01 Class of Service for Extensions
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Direct Station Selection (DSS) Console
Description/Comments
Set up and confirm the Basic
Configuration data for terminal
type (B1).
Set to 1 for a DSS Console to
have one-touch operation. If set to
0, the user must lift the handset
before pressing a DSS key for the
call to complete.
Assign Class of Service (1~15) to
extensions.
Allow a busy extension user to
Manually (0) or Automatically (1)
receive off-hook signals.
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)

7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Preselect
1 = One-Touch
(Automatic
Handsfree)
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 8.01
Level
2 3


2 - 467