NEC Univerge SV8100 Features And Specifications Manual page 649

UNIVERGE SV8100
Program
Program Name
Number
11-10-26 Service Code Setup (for System
Administrator) – Forced Trunk
Disconnect
11-10-27 Service Code Setup (for System
Administrator) – Trunk Port
Disable for Outgoing Calls
11-10-32 Service Code Setup (for System
Administrator) – Set Private Call
Refuse
11-10-33 Service Code Setup (for System
Administrator) – Entry Caller ID
Refuse
11-10-34 Service Code Setup (for System
Administrator) – Set Caller ID
Refuse
11-10-35 Service Code Setup (for System
Administrator) – Dial-In Mode
Switching
11-10-36 Service Code Setup (for System
Administrator) – Change the
Guidance Message Number on
Voice Mail Auto Attendant
11-11-01 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– All
11-11-02 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy
11-11-03 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– No Answer
11-11-04 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Busy/No Answer
11-11-05 Service Code Setup (for Setup/
Entry Operation) – Call Forward
– Both Ring
11-11-07 Service Code Setup (for Setup/
Entry Operation) – Call
Forwarding – Follow Me
Flexible System Numbering
Description/Comments
Customize the forced trunk
disconnect Service Codes for the
System Administrator.
Define the service code which
should be used by an extension
user to block a trunk from being
used for outgoing calls.
Customize the set private call
refuse Service Codes for the
System Administrator.
Customize the entry caller ID
Service Codes for the System
Administrator.
Customize the set caller ID refuse
Service Codes for the System
Administrator.
Customize the forced trunk
disconnect Service Codes for the
System Administrator.
Change the guidance message
number on voice mail auto
attendant Service Codes for the
System Administrator.
Set the service code for setting call
forwarding all calls.
Set the service code for setting call
forwarding for busy calls.
Set the service code for setting call
forwarding for no answer.
Set the service code for setting
call forwarding for busy or no
answer.
Set the service code for setting
call forwarding for busy or no
answer.
Set the service code for setting
call forwarding for follow me.
Assigned Data
1
MLT, SLT
(default not assigned)
MLT, SLT
(default = 645)
MLT, SLT
(default not assigned)
MLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default not assigned)
MLT, SLT
(default = 741)
MLT, SLT
(default = 742)
MLT, SLT
(default = 743)
MLT, SLT
(default = 744)
MLT, SLT
(default = 745)
MLT, SLT
(default = 746)
Issue 8.01
Level
2 3













2 - 621