NEC Univerge SV8100 Features And Specifications Manual page 507

UNIVERGE SV8100
Program
Program Name
Number
21-01-02 System Options for Outgoing
Calls – Intercom Interdigit Time
Operation
To use Directory Dialing from a multiline terminal with an LCD:
1. Press the Dir softkey.
-OR-
Press the Right Cursor key.
2. Press the softkey for the Directory Dialing type:
SPD–Speed Dials

EXT–co-worker's Extensions

STA–Personal Speed Dials

TELBK–Telephone Book

Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your

extension cannot normally use Speed Dial – System/Group/Station, Directory Dialing can not access it either.
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
You can enter several letters to help narrow the search.

Press # to enter additional letters on the same key (ex: TOM = 8666#6).

4. Press the Down Arrow softkey to jump to that section.
5. Press the Volume  or  key to scroll through the list.
If you wait too long between your selections, Directory Dialing automatically cancels.

6. Lift the handset or press the DIAL softkey, or press Speaker to place the selected call.
If you selected an outside call, it routes according to your system Trunk Group Routing/ARS setup.

To cancel Directory Dialing:
Press the Exit key.
Directory Dialing
Description/Comments
If a user waits longer than this time
between Directory Dialing steps,
Directory Dialing automatically
cancels.
Assigned Data
1
0~64800 (seconds)
(default = 10)

Issue 8.01
Level
2 3
2 - 479