NEC Univerge SV8100 Features And Specifications Manual page 781

UNIVERGE SV8100
Program
Program Name
Number
10-26-03 IP System Operation Setup – SIP
Peer to Peer Mode
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
84-06-01 PVA Data Setting – RTP Port
Number
84-06-02 PVA Data Setting – RTCP Port
Number
84-06-04 PVA Data Setting – Fract Lost
Threshold
84-06-05 PVA Data Setting – Packets Lost
Threshold
84-06-07 PVA Data Setting – Jitter
Threshold
84-06-09 PVA Data Setting – Delay LSR
Threshold
IP Single Line Telephone (SIP)
Description/Comments
Enable/Disable the Peer to Peer
feature for SIP IP stations.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Define the Media Gateway starting
RTP Port Number.
Define the Media Gateway
Starting RTCP Port Number. The
RTCP Port Number is the RTP
port number + 1.
Define the fractional lost threshold
– this data is sent to the
UNIVERGE SV8100 CD-CP00-US
when the value exceeds the
defined value.
Define the packet lost threshold –
this data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
Define the Jitter Threshold – this
data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
Define the Delay threshold – this
data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
Assigned Data
1
0 = Off
1 = On
(default = 1)
0 = Normal
1 = Special
(default = 0)

0~65535
(default = 10020)
RTP Port Number + 1
(default = 10021)
0~100%
(default = 0)
0~16777215
(default = 0)
0~4294967295
(seconds)
(default = 0)
0~4294967295
(default = 0)
Issue 8.01
Level
2 3







2 - 753