NEC Univerge SV8100 Features And Specifications Manual page 258

Hide thumbs Also See for Univerge SV8100:

Table of Contents

An additional digit (such as 1) may be required to complete the call (Program 10-02-04).

For example:

Incoming Caller ID shows: 2125551212.

If your area code is NOT 212, define a 1 in Program 10-02-04. When callback is executed, the

system prefixes 1 on the digits dialed string.

Caller ID Sender Queuing Added

The UNIVERGE SV8100 system can provide Caller ID (calling party number) to a single line telephone

with a display.

The system can queue incoming calls to the single line telephone if the system Caller ID sender

resources are busy. Refer to Program 20-19-05 in the Electra Elite IPK II Programming Manual.

If the single line telephone user lifts their handset while an incoming call is waiting in queue, they hear

silence (no dial tone) and cannot dial out. When the single line telephone user goes back on-hook, the

system immediately sends the queued call to the single line telephone without Caller ID.

Option Available for FSK or DTMF Type for Single Line Telephone

An option (Program 15-03-11) is available for the Caller ID which allows you to select either FSK or

DTMF as the Caller ID type to be received by a single line telephone.

Option Available for FSK or DTMF Type from Analog Trunk

An option (Program 14-02-16) is available for the Caller ID which allows you to select the type of Caller

ID signal from an analog trunk – FSK or DTMF.

To have pre-answer Caller ID from the voice mail, the call must be an unscreened transfer.

Caller ID is provided by the CD-CP00-US. The PZ-BS10 blade, which plugs into the

chassis, can provide additional resources for Caller ID if needed.

Caller ID Name can display up to 12 characters.

Caller ID Number can display up to 11 characters.

A Caller ID Number with more than 12 digits follows Program 20-19-01 (first 10 or the last

Caller ID information can be stored in Speed Dialing or One-Touch bins.

Caller ID can be displayed for incoming calls and transferred calls.

ARS can block outgoing Caller ID information call-by-call. To do this, insert the Caller ID

block code (e.g., .67) in the ARS Dial Treatments.

UNIVERGE SV8100

Show Quick Links

Table of Contents