NEC Univerge SV8100 Features And Specifications Manual page 519

UNIVERGE SV8100
Related Features
Call Forwarding
Call Forwarding/Do Not Disturb Override
Central Office Calls, Answering
Direct Inward Line (DIL)
Distinctive Ringing, Tones and Flash Patterns
Selectable Display Messaging
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-08 Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
11-12-01 Service Code Setup (for Service
Access) – Bypass Call
11-16-06 Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
15-07-01 Programmable Function Keys
Do Not Disturb
Description/Comments
Assign Service Code for DND.
Assign Service Code for DND.
If a single digit service code is to
be used, assign an available code
number.
Assign functions to multiline
terminal line keys (DND = 3).
Assigned Data
1
MLT, SLT
(default = 747)
MLT, SLT
(default = 707)
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Issue 8.01
Level
2 3



2 - 491