Isuzu 1999 RODEO Workshop Manual page 2142

8B–12 WIPER/WASHER SYSTEM
Removal
1. Remove the wiper blade from the wiper arm.
2. Push out the wiper rubber from the wiper blade by
sliding it horizontally while holding down the rubber on
the wiper blade convex (1) side.
CAUTION: When the wiper blade has been
removed, wrap the tip of the wiper arm with cloth, to
avoid damaging the glass.
Rear Wiper Blade Rubber
Installation
880RW022
1. Install the wiper blade rubber.
f Insert the tip of wiper rubber (2) from the opposite
side of removal in the arrow direction.
f Check if the convex part (3) of wiper blade is
installed in the groove of the wiper rubber.
880RX001
880RX002