Isuzu 1999 RODEO Workshop Manual page 1707

6E2–464
RODEO 6VD1 3.2L ENGINE DRIVEABILITY AND EMISSIONS
4. Remove the accelerator control cable (on the
accelerator pedal end).
5. Remove the grommet.
6. Remove the accelerator control cable.
Inspection Procedure
Check the following items, and replace the control cable if
any abnormality is found:
f The control cable should move smoothly.
f The control cable should not be bent or kinked.
f The control cable should be free of damage and
corrosion.
Installation Procedure
1. Install the accelerator control cable.
TS23982
2. Install the grommet.
3. Install the accelerator control cable (on the
accelerator pedal end).
TS23983
TS23983
TS23982