Isuzu 1999 RODEO Workshop Manual page 2012

MANUAL TRANSMISSION
7B–46
11. Attach the bearing remover to the counter gear shaft.
Use the bearing remover to remove the ball
bearing(17) and the counter 5th gear(18).
12. Remove counter reverse gear(19).
13. Remove 5th gear(20), 5th block ring(21), and needle
bearing (2 piece type) (22).
14. Engage the 3rd–4th synchronizer with the 3rd gear.
Engage the 1st–2nd synchronizer with the 1st gear.
Attach the holding fixture J–37224 and base
J–3289–20 to the mainshaft and the counter gear.
226RS006
Use the mainshaft nut wrench J–37219 to remove the
mainshaft nut(23).
226RS007
226RS008
226RS009