Isuzu 1999 RODEO Workshop Manual page 1851

Disassembled View
Legend
(1) Converter Clutch Solenoid Assembly
(2) Retainer
(3) Force Motor Solenoid
(4) Retainer
(5) Plug
(6) 3/4 Accumulator Valve
(7) 3/4 Accumulator Control Valve
Disassembly
1. Remove 11mm bolt from valve body.
f Remove converter control solenoid assembly (1).
2. Remove 11mm bolt and retainer (2) from valve body.
f Remove force motor solenoid (3).
3. Remove retainer (4), plug (5), 3/4 accumulator valve
(6), and 3/4 accumulator control valve (7)
4. Remove spring (8), retaining ring (9), and feed limit
valve (10).
5. Remove plug retainer (11), O-ring (12), plug (13), and
force motor screen assembly (14).
f Use 5 mm bolt to pull plug.
AUTOMATIC TRANSMISSION (4L30–E)
Adapter Case Valve Body
Inspection and Repair
Inspect for the following, and replace any damaged or
worn parts:
Reassembly
(8) Spring
(9) Retaining Ring
(10) Feed Iimit Valve
(11) Plug Retainer
(12) O-ring
(13) Plug
(14) Force Motor Screen Assembly
(15) Adapter Case Valve Body
1. Damage or wear to each valve.
2. Damage in oil passeges.
3. Cracks or damage to valve body.
4. Valve operations.
5. Spring fatigue.
1. Install force motor screen assembly (14), plug (13),
O-ring (12), and plug retainer (11).
2. Install feed limit valve (10), retaining ring (9), and
spring (8).
7A–69
243RW001