Isuzu 1999 RODEO Workshop Manual page 1997

Disassembly
1. Clean the exterior of the unit with solvent.
2. Remove the drain plug from the transmission case
and transfer case and drain the lubricant.
3. Remove the clutch release bearing(1) from the
transmission case.
4. Remove the snap pin.
Remove the shift fork pin and shift fork(2) from the
fulcrum bridge(3).
MANUAL TRANSMISSION
5. Remove the fulcrum bridge bolts.
f Remove
transmission case.
Remove the front cover(4) and gasket from the
transmission case.
6. Remove counter front bearing snap ring(5) and top
gear bearing snap ring(6).
201RS020
Use a pair of snap ring pliers to remove the snap ring.
201RS021
the fulcrum bridge(3)
7B–31
from the
201RS022
226RS001