Isuzu 1999 RODEO Workshop Manual page 2034

MANUAL TRANSMISSION
7B–68
16. Using a 22 mm wrench, remove the backup lamp
switch from the 5–R shift lever side of the case. Note
that the threads use sealer.
Lift the 5–R lever(9) out of the transmission case.
Remove the spring from the case.
Remove the reverse fork and spring assembly(9)
along with the 5–R lever(9).
17. Remove the 5th drive gear(10) and blocking ring(10)
from the counter shaft.
18. Remove slip yoke seal(11) and snap ring(11) from the
mainshaft.
230RS018
19. Remove speedometer drive gear(11) and clip(11) by
using speed drive gear puller J–38878.
230RS019
226RS100
226RS101