Isuzu 1999 RODEO Workshop Manual page 2515

EXTERIOR/INTERIOR TRIM
8J–4
3. Remove the regulator handle (1).
f Pull the hook (2) out and remove the regulator
handle.
4. Remove the power window switch (1).
f Pry the power window switch out and disconnect
the switch connector.
635RW006
5. Remove the speaker cover.
6. Remove the front speaker.
f Remove the front speaker fixing screws in order to
disconnect the speaker connector.
7. Remove the inside handle fixing screw.
CAUTION: Take care not to apply excessive force on
the inside handle link, lest this link is elongated,
which could make it impossible to operate the door
with the inside handle.
631RW004
8. Remove the door trim panel.
f Remove 5 fixing screws (1), (3) in order to take off 6
clips (2) from the door panel.
825RW097
632RW003