SUN ROOF/CONVERTIBLE TOP
8I–8
Removal
1. Disconnect the battery ground cable.
2. Remove the headlining (2).
Refer to the Headlining removal steps in
Exterior/Interior Trim section.
3. Remove the sun roof control unit (1).
f Disconnect two connectors.
f Remove two screws.
Removal
1. Disconnect the battery ground cable.
2. Remove the sun roof drive unit assembly (1) to
remove the safety stop switch (2).
Refer to the Sun Roof Frame Complete Assembly
disassembly steps in this section.
Sun Roof Control Unit
Installation
To install, follow the removal steps in the reverse order.
665RW013
Safety Stop Switch
Installation
To install, follow the removal steps in the reverse order.
665RS022
Need help?
Do you have a question about the 1999 RODEO and is the answer not in the manual?