Removal
1. Disconnect the ground battery cable.
2. Remove the instrument panel lower cover (7) and
driver knee bolster panel assembly (8).
Legend
(7) Driver Lower Cover
(8) Driver Knee Bolster Panel
3. Remove pin and jaw joint pin (1).
4. Remove pedal assembly and switch (2).
5. Remove oil line pipe (3).
6. Remove slave cylinder assembly (4).
X22SE MUA (4 4)
TREMEC T5R
7. Remove master cylinder assembly (5).
8. Remove oil line hose (6).
Inspection and Repair
740RW023
Make
necessary
replacements if wear, damage or other problems are
discovered during inspection.
205RW001
CLUTCH
adjustments,
repairs,
and
7C–27
205RW002
part