Isuzu 1999 RODEO Workshop Manual page 1978

MANUAL TRANSMISSION
7B–12
20. Remove engine rear mount nuts(16) from third
crossmember.
21. Remove third crossmember(17) by removing six
fixing bolts.
22. Remove starter(18) (6VD1 engine).
23. Remove flywheel under cover(19). 6VD1 engine:3
pieces, X22SE engine:1 piece.
24. Use clutch release bearing remover J–39207 to
disconnect the clutch release bearing from the clutch
pressure plate (6VD1 engine).
F07RW008
25. Pull the shift fork toward the transmission to press the
clutch release bearing against the clutch (6VD1
engine).
26. Insert the clutch release bearing remover between
the wedge collar and the release bearing (6VD1
engine).
NOTE: Be sure not to insert the remover between the
wedge collar and the clutch.
022RW001
220RS002