License Plate Light Bulb (Tailgate Type) - Isuzu 1999 RODEO Workshop Manual

LIGHTING SYSTEM
8A–6
License Plate Light Bulb (Bumper Type)
Removal
1. Disconnect the battery ground cable.
2. Remove the lens cover (3).
f Remove two screws.
3. Remove the lens (2).
4. Remove the bulb (1).
f Pull out the bulb from the socket.

License Plate Light Bulb (Tailgate Type)

Removal
1. Disconnect the battery ground cable.
2. Remove the lens cover (3).
f Remove two screws.
3. Remove the bulb (2).
f Pull out the bulb from the socket (1).
Installation
To install, follow the removal steps in the reverse order.
825RW070
Installation
To install, follow the removal steps in the reverse order.
803RW014