Isuzu 1999 RODEO Workshop Manual page 2513

EXTERIOR/INTERIOR TRIM
8J–2
Consoles and Associated Parts
Legend
(1) Front Console
Removal
1. Disconnect the battery ground cable.
2. Remove the shift knob (M/T) / transfer knob (A/T).
3. Remove the front console assembly.
f Remove four fixing screws and disconnect the
switch connectors.
4. Remove the front seat assembly(RH).
f Refer to the Front Seat Assembly removal steps in
Seats section.
Consoles
(2) Console Brackets
(3) Rear Console Assembly
5. Remove the rear console assembly.
f Remove two fixing screws.
Open the rear cover, remove two nuts, then the
center console assembly.
Installation
To install, follow the removal steps in the reverse order.
745RX002