Isuzu 1999 RODEO Workshop Manual page 2063

10. Push the shift shaft(2) through the 3–4 shift fork(3)
and into the front of the cover(10).
11. Install the roll pin(1) that holds the selector arm(5) to
the shift shaft(2).
MANUAL TRANSMISSION
12. Lubricate and install the O-ring(9) on the rear of the
shift cover(10).
230RS036
Check the shift cover parts for proper assembly
by doing the following:
f Insert a 3/16–inch diameter pin punch into the offset
lever hole of the shift shaft(2).
f Hold the shift cover(10) parallel to the floor and
rotate the shift shaft(2) so that the punch is vertical.
230RS038
7B–97
230RS038
230RS039