License Plate Lamp; Replacement Bulbs - Isuzu 2008 i290 Owner's Manual

License Plate Lamp

To replace one of these bulbs:
1. Reach under the rear bumper for the bulb socket.
2. Turn the bulb socket counterclockwise and pull
the bulb socket out of the connector.
3. Pull the old bulb straight out from the bulb socket.
4. Push the new bulb straight in until it clicks to
secure it.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
2008 - Isuzu 290/370 Owner Manual

Replacement Bulbs

Exterior Lamp
Center High-Mounted Stoplamp
(CHMSL)
Headlamps
Composite High-beam
Composite Low-beam
Sealed-beam
License Plate Lamp
Parking/Front Turn Signal/Daytime
Running Lamp (DRL)
Parking Lamp (Inboard)
Stoplamp, Rear Turn Signal,
Taillamp, and Back-up Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
912
9005
9006
H6054
W5W
3757KA
3157A
3057
5-47