File Structure - Analog Devices VisualDSP++ 5.0 Service Manual

File Structure

File Structure
The API for the interrupt manager is defined in the
This file is located in the
automatically included by the
the
services.h
Applications should link with only one of the system services library files.
These files are located in the
section in Chapter 6,
the proper library file.
For convenience, all source code for the interrupt manager is located in
the
Blackfin/lib/src/services
ment-dependent code is located in the file a
the operating environment being targeted. These files should never be
linked into an application because the appropriate system services library
file contains all required object code.
2-16
Blackfin/include/services
services.h
file should be included in the application code.
Blackfin/lib
DMA Manager, for more information on selecting
directory. All operating environ-
VisualDSP++ 5.0 Device Drivers and System
adi_int.h
file in that same directory. Only
directory. See the approprite
di_int_xxx.c
Services Manual for Blackfin Processors
header file.
subdirectory and is
, where is
xxx